/K%C3%A4sitellyt%2006%202024/Automaatio2024%20mittaus%20valvonta%20huolto%20kaasuh%C3%A4lytin%20(38).jpg?width=480&height=360&name=Automaatio2024%20mittaus%20valvonta%20huolto%20kaasuh%C3%A4lytin%20(38).jpg)
Tuotehaku
Tuotemerkit
- Kaikki
- Adev
- ADZ NAGANO
- Aquametro
- Badger
- Banner
- Bauer Kompressoren
- Blackline Safety
- BOGE
- Classic Filters
- Codel
- Crane
- Delta Mobrey
- Detector
- Dias Infrared Systems
- Donaldson
- Dostmann
- Effecto
- EKS
- Elindco
- Emerson
- Escha
- Finetek
- Fitok
- Fortress
- FST GmbH
- Hanwha Techwin
- Hertz Kompressoren
- Honeywell
- Houdec
- Iconics
- Idem Safety
- IPR
- LASE
- Limatherm Sensor
- Lumasense
- Marsh Bellofram
- MB Connect Line
- MesaLabs
- Microsyst
- Mobotix
- Monitor
- Motrona
- Nexcom
- Optex
- Parker
- PST
- Red Lion
- Scaime
- SEG
- Seneca
- Senmatic
- SpotSee
- TURCK
- VPInstruments
- Watlow
- Zander Aachen
- Zimmerli Inert
Automaatio ja digitaaliset ratkaisut
- Anturit ja kaapelit
- Instrumentointi ja analysointi
- IIoT
- Kaasuhälyttimet
- Näyttö- ja merkinantolaitteet
- Ohjaus ja tiedonsiirto
- Robotiikka ja konenäkö
- Turvallisuus
Paineilma
Honeywell 3000 Series - MkII and MkIII Gas Transmitters and Detectors
For monitoring toxic gases and oxygen levels in hazardous areas.
Honeywell 3000 Series gas transmitters offer comprehensive monitoring of toxic gases and oxygen levels in hazardous areas.
They can be installed indoors or outdoors up to 15 meters from the sampling point.
The MkII housing is flameproof and primarily designed for Zone 1. Using an optional remote control, it can also be installed in Zone 0. Mk III can be used in Zone 0 areas with a barrier.
When a standard signal field device needs to be placed in a hazardous area, a "barrier" must be used to meet safety requirements.
Users can program the detector through an easy-to-use interface. Diagnostic software and programmable calibration intervals simplify maintenance.
Compatible with the Touchpoint Plus or Touchpoint Pro gas monitoring panel.