• Ehdotuksia ei ole, koska hakukenttä on tyhjä.

Tuotehaku


Tuotemerkit

Automaatio ja digitaaliset ratkaisut

Paineilma

Decentralized I/O Module TBEN-S


The market's most compact Ethernet IO module with multi-protocol and ARGEE programming.




Pyydä tarjous tai kysy lisätietoja



The most compact Ethernet IO module on the market with multiprotocol and ARGEE programming.Multiprotocol
  • PROFINET, EtherNet/IP, or Modbus TCP bus in the same IO module
  • Automatically detects the bus protocol when connected
  • Reduces spare parts need if multiple buses are in use
Integrated Ethernet Switch
  • Bus can be extended directly to the next module
Protection Class IP67/IP69K
  • Electronics completely encased in resin
  • Best possible protection, even under 100 bar pressure washing
Operating Temperature -40…+70°C
  • Works indoors and outdoors without issues from temperature changes
Galvanic Isolation
  • The IO module’s power supply is galvanically isolated from inputs/outputs
  • Short circuits in outputs do not affect module and bus operation, ensuring fault notification
FLC (Field Logic Controller)
  • Allows programming functions with ARGEE software
  • Reduces bus traffic
  • Less need for complex logic programming enables cost-effective main logic
  • Allows modular machine operation testing without connecting to main logic
  • Individual functions, such as light control, can be implemented directly on the IO module
Integrated Web Server
  • No need for separate software for parameter changes; connect the module to the PC’s Ethernet port and enter the device’s IP address into the browser
  • Password required for changes; diagnostics are visible without a password
  • In critical applications, the web server can be disabled after configuration, allowing changes only via the bus
Digital Inputs/Outputs
  • Each port can be configured as an input or output (PNP, 0.5 A) as needed
  • No need for separate input and output modules
Analog InputsEach channel can be selected as follows:
  • Voltage: +/- 500 mV, +/- 100 mV, +/- 50 mV, +/- 1 V, 0 / 1-5 V, +/- 10 V, 0 / 2-10 V
  • Current: 0/4…20 mA, +/- 20 mA
  • RTD: PT100, NI100, PT200, PT500, PT1000, NI1000
  • Resistance: 0-100Ω / 400Ω / 2kΩ / 4kΩ
  • Thermocouples: Type B, C, E, G, J, K, N, R, S, T
  • A single module can replace multiple ones for temperature measurement with Pt100 sensors and pressure measurement with 4-20 mA transmitters
  • Sensors can be selected based on need, not limited by existing input signals
Analog Outputs
  • Voltage: 0/1…5 V, +/-10 V, 0/2…10 V
  • Current: 0/4…20 mA
  • No separate modules needed for voltage and current controls
IO-Link Master
  • SIDI simplifies IO-Link device connection to the module
  • Sensors (Turck, Banner) IODD integrated into the GSDML file, eliminating the need for separate IODD file downloads
  • Custom GSDML available for frequent use of other sensors
  • Speeds up projects as all sensors are immediately available once the IO-Link Master’s GSDML file is implemented
Serial Communication
  • Two serial ports configurable as RS485 or RS232
  • Up to eight Modbus RTU slaves integrated into one serial port
  • Four digital channels configurable as inputs or outputs
  • Works as a protocol converter, e.g., Modbus RTU / PROFINET
  • Modbus RTU serial communication remains widely used for its simplicity and affordability, integrating devices into Ethernet networks
RFID
  • Integration into PLC systems without additional function modules (FB)
  • Two ports, one for HF readers and the other for UHF readers
  • Continuous HF bus mode, up to 32 HF read/write heads per channel
  • Four configurable digital channels for inputs/outputs, e.g., to trigger green light when a tag is read
  • Integrated web server simplifies commissioning
  • Port LEDs act as local indicators for error states
  • Programmable FLC / ARGEE

Ota yhteyttä